Kaydon Thin Section Bearings KA020XPO Bearings is one kind of ball
Bearings design. this kinds of Ball Bearings consist of inner
ring,outer ring,steel balls and brass cage , some design will be
nylon cage or PEEK cage,Thin Section Bearing have open ,one-piece
seals,double-side sealed design ,Kaydon thin section ball bearings
were developed to meet current engineer needs for thinner,lighter
bearings . they are used extensively in automation and labor saving
equipment,such as industrial robots .
Thin Section Bearing Kaydon KA020XPO Bearing and ultra-thin-wall
bearings which KAYDON And FAG , NSK , KOYO , EASIER can be supply,
are Comprised of seven open series and five sealed thin section
bearing , Inner hole diameter from 1 inch to 40 inches ,
Cross-sectional dimensions range from 0.1875×0.1875 inches to
1.000×1.000 inches , the thin section bearing can be angular
contact ball bearing (A design) , four point contact ball bearing
(X design) , Deep Groove ball bearing ( C ) , Various designs are
available in different series , Which series depends on the size of
the cross section , as well as steel Balls and Series Matched .
Therefore, the rigidity and load carrying capacity of these
combinations are much higher than single-bearing product .
Product Overview | Values |
|---|
KAYDON Part No. | KA020XPO Bearing |
Type | Four Point |
Closures | Open |
Bore (inches) | 2 |
Outside (inches) | 2.5 |
Cross Section | 1/4″ x 1/4″ |
L1 (inches) | 2.186 |
L2 (inches) | 2.314 |
Material | Chrome steel |
Dynamic Radial(lbs) | 514 |
Dynamic Thrust(lbs) | 790 |
Dynamic Moment(in-lbs) | 434 |
Static Radial (lbs) | 680 |
Static Thrust (lbs) | 1,710 |
Static Moment(in-lbs) | 770 |
Weight (lbs) | 0.045 |
Product features Of Kaydon KA020XPO bearing
-- X-type four-point contact ball bearing
-- Interchanges with FAG L15QA200 Bearing
NSK NBA5006 Bearing
INA CSEA020 Bearing
FPAA200 Bearing
-- 2 inch bore diameter
-- Thin section bearings help reduce total cost in a system by
allowing for design efficiency over standard bearing sizes
-- Made from 52100 chrome steel and 440C stainless steel
Product description Kaydon KA020XPO bearing
The Kaydon KA020XPO Four-Point Contact Ball Bearing , X-Type is ideal for moment
loading. These bearings are designed with gothic arch raceways
creating 4 contact points between the balls and the raceways. This
design is excellent for moment loading and reversing axial loading.
The X-Type bearing can be used for other light loading conditions,
but is not recommended in place of the C- or A-Type bearing for
pure radial loads. Interchanges with INA # CSEA020 Bearing. 2 Inch
Bore Diameter, 2.5 Inch OD, 0.25 Inch Width.
XRB is the China bearing manufacturer,exporter, supplier, it can
supply Kaydon KA020XPO Bearing and full series kaydon thin section
bearings , Our large quantity Thin Section Bearings can meet your
need with good quality and fast delivery, Also you can find the
other type and brand bearing, just like NSK , FAG , NTN , NKE , ZWZ
, TIMKEN . We accepted DHL , FEDEX , TNT express for small order
and samples order,also the transportation By AIR or By Sea , by
Train are all avaiable.we asure we can ship high quality Thin
Section Bearings KA020XPO Bearing to your office at the first time.
